Insignia NS-A1200 User Manual

Page of 62
14
Insignia NS-A1200 Car Amplifier
www.insignia-products.com
Adjusting the audio level by ear
For best performance, you must match the amplifier’s input sensitivity 
to your source’s maximum output level (also called “gain matching”). 
The LEVEL (gain) control located on the side of the amplifier is 
designed to do this. It is not a volume control. It adjusts the incoming 
signal level so that the source device and the amplifier reach 
maximum output at the same time. This ensures that maximum 
system volume is achieved with minimal distortion.
To adjust the audio level:
Turn the LEVEL (gain) control fully counterclockwise to MIN.
Play full-frequency music that has continuously high levels 
(FM pop music is a good choice).
Turn up the source device’s volume control until just before you 
hear the source device’s distortion, or at 90% of full output 
(whichever comes first).
Slowly turn the LEVEL (gain) control clockwise until just before 
you hear amplifier or speaker distortion, or until you reach a 
maximum comfortable listening level (whichever comes first).
Turn the source device’s volume control back down to a 
comfortable listening level.
Adjusting bass boost
Warning
High-powered audio systems in a vehicle are capable of 
generating “live concert” levels of sound pressure. 
Continued exposure to excessively high volume sound 
levels may cause hearing loss or damage. Operation of a 
motor vehicle while listening to audio equipment at high 
volume levels may impair your ability to hear external 
sounds such as horns, warning signals, or emergency 
vehicles, which could create a traffic hazard.
+18 dB
@45 Hz
NS-A1200b.fm  Page 14  Monday, May 21, 2007  11:37 PM