Fusion MS-AV700 User Manual

11

ADJUSTING SUB-WOOFER LEVEL AND TONE

Use the Sub level and Tone screens to set the sub-woofer levels and tone. 

Sub-woofer level can be adjusted for each Zone individually, but tone 
adjustments affect all Zones.

1.  Press and hold down the Encoder for at least one second. The Sub level 

screen is displayed.

2.  Turn the Encoder to adjust the sub-woofer level for the highlighted Zone, as 

required.

3.  Press the Encoder to highlight the next Zone, and adjust as required. When 

you press the Encoder in the last Zone, the Tone screen is displayed.

60

SUPPORT, SALES AND SERVICE

FUSION Electronics in New Zealand 

 

+ 64 9 369 2900

FUSION Electronics Australia   

 

+ 61 1300 736 012

FUSION Electronics Europe 

 

 

+31 76 572 3632

FUSION Electronics USA 

 

 

+1 623 580 9000

Website: www.fusionelectronics.com 

SPECIFICATIONS 

This device complies with part 15 of the FCC rules. Operation is subject to the 
following two conditions:

•  this device may not cause harmful interference, and

•  this device must accept any interference received, including interference 

that may cause undesired operation. 

Operating voltage ......................................10.2–16 VDC negative ground

Fuse rating .....................................................15 amp

Laser power ..................................................Class I

Maximum .........................................................70 W x 4

26 WRMS per channel at 4 ohms

45 WRMS per channel at 2 ohms

Pre-output voltage ....................................3 VRMS

 

Auxiliary input sensitivity 
The 700 Series AUX input sensitivity is 1V RMS when gain is set to 
0dB.

•  Increasing the gain by 6dB doubles the input sensitivity (0.5V RMS for 

same volume).