Fusion MS-AV700 User Manual

17

Manual

All bands

•  Press the Forward or Backward key to step through 

the range of frequencies or channels one at a time.

•  Press and hold down the key for rapid scanning of 

frequencies or channels.

Manual

SiriusXM

•  Press the Forward or Backward key to step through 

all channels one at a time.

Category

SiriusXM

•  Press the Play / Pause, Forward or Backward key to 

step through the channels in the selected category.

•  Only available when a category is selected in the 

Category menu item. For further details see 
“Category” on page 51.

Auto

AM/FM

• Press the Forward or Backward key to start 

searching for available stations.

•  Press the Play / Pause, Forward or Backward key to 

stop the search.

Scan

VHF

•  Scans through preset channels, pausing on a 

channel while it is transmitting. 

•  Only available if there are two or more presets 

saved.

•  If there is any background noise, the scan will stop. 

For further details see “Minimizing background 
noise” on page 19.

•  Press the Play / Pause, Forward or Backward key to 

turn scan mode off. For further details see “Turning 
scan mode on” on page 19.
NOTE: The Scan function is activated from the 
settings menu, see ‘Setting up VHF’

Preset

All bands

•  Press the Forward or Backward key to step through 

available presets. 

•  Only available if there are two or more presets 

saved.

•  To tune to a specifi c preset:

a. Press the Menu key, and then press the 

Encoder to select Presets.

b. Turn the Encoder to highlight the required 

preset.

c.  Press the Encoder to tune to the highlighted 

preset.

For further details, see “Adding and Removing Presets” 

on page 18.

54

2.  (if required) turn and then press the Encoder to select Parental > Unlock. 

Enter your access code.

3. Select the Lock/Unlock menu item.

4.  Turn the Encoder to highlight a channel then press the Encoder to 

lock (       ) or unlock (       ) the channel, as required.

5.  Press the Menu key (or leave to time out) to exit.

Channel skipping gives the user the ability to set a channel to be skipped / 

missed while navigating via the Forward and Back key in the Sirius Source 

Screen. The user still able to navigate to a skipped channel via the channel list 

found in the menu.

1.  Press the Menu key.

2.  (if required) turn and then press the Encoder to select Parental > Unlock. 

Enter your access code.

3.  Select the Skip/UnSkip menu item.

4.  Turn the Encoder to highlight a channel then press the Encoder to turn on 

(        ) or turn off (        ) skip, as required.

5.  Press the Menu key (or leave to time out) to exit.

ADVANCED SETTINGS 
The settings described in this section are usually set up when the unit is 
installed and not changed again.

Use the sub fi lter setting to control the sub-woofer cutoff frequency. Audio 

signals above the selected frequency will not be passed on to the sub-woofer. 

The sub fi lter settings apply to all sub-woofer outputs.