Fusion MS-IP700 User Manual

51

You can use the Category menu item to control which categories of 
channels are available (Rock, for example) when you are using the Category 
tuning method (see “Tuning Methods” on page 16.

1.  Press the Menu key.

2.  Turn and then press the Encoder to select Category.

3.  Do one of the following:

•  To enable the Category Tuning method, turn and then press the Encoder 

to select the required category name, “Rock” for example:

The Sirius Source Screen is displayed with the 
Tuning mode indicator set to ‘Category’.

Special icons
When you select a channel in the channels list you may see two 
different icons at the right hand side of the list.

•  The padlock icon means the channel is locked or considered 

mature content. If you select this channel you will be asked to 
unlock parent mode, if it is not already unlocked.

•  The green arrow icon means the channel has been setup to be 

skipped when using the Forward and Backward keys in the Sirius 
Source Screen. However, you can always access a skipped 
channel via this channel list.

20

PLAYING CONTENT

Before you can use your iPod as an input source you must fi rst connect the 

device to the 700 Series. For further details, see “Preparing for iPod or USB 

Input” on page 43.

iPod SOURCE SCREEN

An example of a typical iPod input source screen is shown in Figure 4 below.

• 

Press the iPod key. The iPod input source screen is displayed. 
The most recently selected track starts playing at the 
current play point.

• 

Press the Auxiliary key. Keep pressing the key until the iPod 
source screen is displayed.