DELL E23S Series User Manual
State Name
Slot/Device State
Status LED (Green)
Status LED (Amber)
Device identify (blink)
The device is identifying the
slot location or is indicating
the device has received a
Prepare for Removal
command from the host
operating system.
slot location or is indicating
the device has received a
Prepare for Removal
command from the host
operating system.
On for 250 msec
Off for 250 msec
Off for 250 msec
Off
Device failed
The host operating system
no longer has access to the
device because the device
is not responding or has
encountered a critical error
condition.
no longer has access to the
device because the device
is not responding or has
encountered a critical error
condition.
Off
On for 250 msec
Off for 250 msec
Off for 250 msec
Back-Panel Features And Indicators
Figure 5. Back-Panel Features and Indicators
Item
Indicator, Button, or
Connector
Icon
Description
1
Power supply (PSU 3 and 4)
AC
750 W, 1100 W, or 1600 W (when
available)
available)
or
DC
1100 W
2
System identification button
The identification buttons on the front and back panels
can be used to locate a particular system within a rack.
Press to toggle the system ID on and off.
If the system stops responding during POST, press and
can be used to locate a particular system within a rack.
Press to toggle the system ID on and off.
If the system stops responding during POST, press and
hold the system ID button for more than five seconds to
enter BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup) press
To reset iDRAC (if not disabled in F2 iDRAC setup) press
and hold the button for more than 15 seconds.
3
System identification
connector
connector
Connects the optional system status indicator assembly
through the optional cable management arm.
through the optional cable management arm.
14