DELL E23S Series User Manual

Figure 21. Removing and Installing the Memory Riser and Fan Cage

1.

memory riser and fan cage handle

2.

fan cage

3.

memory riser and fan cage back handle

4.

handle lock

5.

cage guides on the side of the chassis

Installing The Memory Riser And Fan Cage

NOTE: Before installing the memory riser and fan cage, ensure there are no loose cables from the hard-drive 

backplane. If the cables are not latched, the cage will not seat firmly into the chassis.

1.

Lift the cage using the handle and align the memory riser and fan cage with the guides on the side of the chassis.

2.

Using the handle, lower the memory riser and fan cage into the system until it is firmly seated on top of the fan tray 

on the system board.

3.

Slide back the cage handle to its position, so that the handle lock snaps in locked position.

4.

Install memory risers.

5.

If applicable, install the memory-riser blanks.

55