DELL E23S Series User Manual

Replacing The Internal USB Key

CAUTION: Many repairs may only be done by a certified service technician. You should only perform 

troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or 

telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your 

warranty. Read and follow the safety instructions that came with the product.

1.

Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and 

peripherals.

2.

Open the system.

3.

Locate the USB connector / USB key on the system board. To locate the USB connector (USB_INT), see Chapter 

System Board Connectors.

4.

If installed, remove the USB key.

5.

Insert the USB key into the USB connector.

6.

Close the system.

7.

Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

8.

Enter the System Setup and verify that the USB key is detected by the system.

Figure 28. Replacing the Internal USB Key

1.

USB memory key connector

2.

USB memory key

Expansion Cards And Expansion-Card Risers

NOTE: A missing or an unsupported expansion-card riser logs an SEL event. It does not prevent your system from 
powering on and no BIOS POST message or F1/F2 pause is displayed.

64