Garmin 720 User Manual

Page of 100
66 
GPSMAP 700 Series Owner’s Manual
Radar
4.  Complete an action:
•  Select HighMedium, or Low to decrease or increase the appearance of rain clutter, if using a GMR
 
20, 21, 40, 41, 18, 18 HD, 24, 24 HD, 404, or 406 radar. Other targets should remain clearly visible on 
the Radar screen. 
•  Select Up or Down to decrease or increase the appearance of rain clutter, if using a GMR 604 xHD, 
606 xHD, 1204 xHD, or 1206 xHD radar. Other targets should remain clearly visible on the Radar 
screen. If the FTC setting is greater than 50%, consider reducing the radar range.
5.  Select Menu > Noise Rejection > Rain Clutter
6.  Select Up or Down to decrease or increase the appearance of nearby rain clutter until other targets are 
clearly visible on the Radar screen. 
Clutter caused by rain may still be visible.
Adjusting Crosstalk Clutter on the Radar Screen
You can reduce the appearance of clutter caused by interference from another nearby radar source. On is the 
default value for the crosstalk setting.
NoTe: Depending upon the radar in use, the crosstalk setting configured for use in one radar mode may or 
). 
1.  From the Home screen, select Radar.
2.  Select CruisingHarboroffshore, or Sentry mode.
3.  Select Menu > Noise Rejection > Crosstlk > on.
Radar Display Appearance
Radar Overlay Numbers
Overlay numbers with data fields 
 can appear on all radar modes, and they provide real-time, at-a-glance 
information. All data bars configured for use in one radar mode appear in every other radar mode. All data bars 
configured for use on the Radar Overlay appear only on the Radar Overlay, and must be configured separately.
Several radar data overlays are available. You can select the data fields to be shown within each data overlay.
When overlay numbers are displayed on the radar screen, the navigation inset 
 is shown during navigation. 
The compass tape 
 can be shown or hidden in each overlay.
Radar with Data Overlay
Selecting a Data Overlay
1.  From the Home screen, select Radar.
2.  Select CruisingHarboroffshore, or Sentry mode.
3.  Select Menu > Radar Setup > overlay Numbers.
4.  Select 
 or 
 to select a data overlay.