ACR Electronics 2883 User Manual

Page of 22
Y1-03-0241A
  
12 
11.  Preventing false alerts 
A  false  alert  is  any  activation  of  the  beacon,  intentional  or  otherwise, 
that does not result from a situation of grave and imminent danger. 
 
Be sure to do the following to help minimize false alerts: 
 
 
Register  your  beacon.  This  does  not  reduce  false  alert  rates; 
however,  when  the  beacon  is  properly  registered,  the  situation  can 
usually be resolved with a phone call. 
 
Be  careful  with  whom  you  leave  your  beacon.  Make  sure  that 
they know how to use it, and that they understand the ramifications 
of causing a false alert. A lot of false alerts are generated by curious 
individuals. If you notice the beacon is flashing the red or green LED 
and 
“beeping”  periodically  on  its  own,  this  likely  means  it  has 
accidentally been activated and needs to be shut off and reported. 
 
Do  not  stow  beacon  while  other  gear  is  in  contact  with  the 
keypad.
 
 
The  Cospas-Sarsat  satellites  detect  distress  beacon  transmissions 
immediately and locate the transmission within a few minutes of beacon 
activation.  
 
NOTE:  If  you  report  a  false  alert  and  the  authorities  have  not received 
the signal, do not be concerned.  This may mean that you were able to 
deactivate the beacon before transmitting the signal. 
12.  False alert 
A false alert must be reported to the search and rescue authorities.  
 
False  alerts  in  the  US  that  are  rectified must  be  reported  to the  US  Air 
Force  Rescue  Coordination  Center  (AFRCC)  to  let  them  know  that  the 
situation  has  been  corrected  and  everything  is  fine.  Responsibly 
reporting  these  events  to  the  AFRCC  or  your  proper  authority  will  not 
incur  a  penalty,  but  deliberate  misuse  or  not  notifying  the  proper 
authority may incur a severe penalty. 
 
Reporting 
Should there be a false alert for any reason, it must be reported to the 
nearest  search  and  rescue  authorities.  The  information  that  should  be 
reported includes: 
// 
The PLB 15-digit Unique Identifier Number (UIN) 
// 
Time and date 
// 
Duration and cause of activation 
// 
Location of beacon at the time of activation 
 
To report false alert in the United States, contact the AFRCC:  
 
United States Air Force Rescue  
Tel: 1-800-851-3051 
Coordination Center (AFRCC)