Standard Horizon CP180 User Manual

Page 56

CP180 / CP180i

  

Figure 10.0 - Tracking

10.0.0 Saving and starting a new Track

A Track is automatically saved to memory. To start a new Track:
1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press

2. Move the ShuttlePoint knob to highlight TRACK and press [ENT].
3. Move the ShuttlePoint knob to highlight ACTIVE TRACK  and press [ENT] or move the

ShuttlePoint knob to the right.

4. Move the ShuttlePoint knob up/down to select the next available open Track and press

[ENT] or move the ShuttlePoint knob to the right.

5. Move the ShuttlePoint knob to highlight TRACKING and press [ENT] or move the

ShuttlePoint knob to the right to set On.

6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.
7. A new Track now will be laid down.

10.0.1 Other Settings in Track Menu

You will notice the Track menu has other selections:

Allows turning on or off the tracking function

This selection allows you to save a Track to one of the 5 Tracks available

Shows or hides a Track shown in ACTIVE TRACK menu

Selects the color of the Track line

Deletes a Track selected in the ACTIVE TRACK menu

Allowable selection are Distance or Time

Setup the Distance interval the Track point is placed on the Chart page

Setup the TIME interval the Track point is placed on the Chart page

10.1 USING THE TRIP LOG

On the Chart, Navigation, Highway and NMEA Data pages the windows may be customized
to show TRIP LOG information.
1. Select one of the pages listed above, press and hold [MENU]. You will notice one of the

data boxes will be highlighted.

2. Press [ENT] and move the ShuttlePoint knob to highlight  TRIP LOG, press [ENT] or

move the ShuttlePoint knob to the right.

3. A popup window will be shown with Nm  (Nautical Mile), Sm  (Statute Mile), Km

(Kilometer) and RESET. Move the ShuttlePoint knob to select the desired units of
measure and press [ENT] or move the ShuttlePoint knob to the right.