AT&T MLS-6TM User Manual

Rotary  Dialing

#108

Time out

If you have any rotary lines and are having trouble calling out on

standard touch-tone phones, use this procedure to change the length of the
Rotary Dialing Timeout.  For example, if users dial slowly and calls are not com-
pleted or are connected to wrong numbers, lengthen the timeout.  Do not

1 = 4  seconds

✓  

2 = 8 seconds

3 = 12 seconds

Use this procedure only if the Dial Mode (#201) for at least one

outside line in the system is set to rotary.

1.   Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 0 ] [ 8 ] .  The

display reads:

Rotary Timeout

2 8-secs

2.   Change the Rotary Dialing Timeout by entering the setting number as

listed above.  For example, to lengthen the Rotary Dialing Timeout to 12
seconds, press [3]  . The display reads:

Rotary Timeout

3 12-sees

Outside Conference

#109

Prevents everyone on the system from including outside parties in

conference calls.

Valid Entries:     ✓  

1 = Allow conference calls with outside parties

      2 = Deny conference calls with outside parties

1.   

Press [ Feature  ] [ 0 ] [ 0 ] [ System Program ] [ System Program ]  [ # ]  [ 1 ] [ 0 ] [ 9 ] .  

The

display reads:

Outside Conf

1 Allowed

2.   To deny conference calls with outside parties, press [  Next Data ] .  The

display reads:

Outside Conf

2 Disallowed

3-8  System Programming