AT&T MLS-6TM User Manual

Personal Speed Dial

You can program up to 20 frequently dialed numbers for each

Numbers

extension.  The user can then dial these numbers by pressing [ Feature ]  and the
2-digit code you assign the number during programming.  Personal Speed Dial
numbers do not override other restrictions assigned to an extension.

Any phone number (up to 20 digits) assigned codes 80

through 99

✓ 

No number assigned to any code

You cannot program a Personal Speed Dial code onto a but-

ton.

If you program emergency numbers as Personal Speed

Dial numbers, follow these guidelines when testing them:

1.    Remain on the line and briefly explain to the dispatcher the reason for the

call before hanging up.

2.   Perform such activities in the off-peak hours, such as early morning or late

evening.

1.   Press [ Feature  ][ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ].  The

display reads:

CENTRAL TEL PROG

Extension:

2.   Enter the extension to be programmed.  For example, to select extension

17, press [ 1 ] [ 7 ]. The display reads:

PROGRAM EXT 17

3.   Enter the 2-digit code you want to assign the phone number by pressing

[ Feature ] and 2 digits between 80 and 99.  For example, to assign code 80,

press [ Feature  ] [ 8 ] [ 0 ].  If a number is already assigned to the code, it

appears in the display.  If no number is assigned to the code, the display
reads:

Blank

4.   Enter the phone number according to the instructions given for System

To program another feature on this extension, go to step 3 for that feature.

✓ 

= Factory Setting

To program another extension, press [ Central Tel Prog ] and continue from step 2.

To go to system programming mode, press [ Central Tel Prog ] [ System Program ].

To exit centralized telephone programming, press [ Feature ] [ [ 0 ] [ 0 ].

Centralized Telephone Programming  4-5