AT&T MLS-6TM User Manual

Call Pickup

Enables the user to answer any call ringing on a specific exten-

sion.  By programming this feature on a button, the user can pick up a call on

that extension with one touch.

1.

2.

3.

4.

Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ] .  The

display  reads:

CENTRAL TEL PROG

Extension:

Enter the extension to be programmed.  For example, to program exten-
sion 22, press [ 2  ] [ 2 ] .  The display reads:

PROGRAM EXT 22

Select a button to program by pressing any programmable button.

Enter the extension to be answered by pressing the left [ Intercom ] button,

Pickup Group

followed by [ 6 ] [ x ] [ x ], where XX is the extension number (10 through 33).

For example, to answer calls on extension 23, press [ Intercom ] [ 6 ] [ 2 ] [ 3 ].

The display reads:

Call Pickup 23

To program another feature on this extension, go to step 3 for that feature.

Enables the user to answer an outside call ringing on any exten-

sion in the Pickup Group even if the user’s phone does not have that line.  By
programming this feature on a button, the user can pickup calls in the group
with one touch.  The Pickup Group is assigned through system programming
procedure #501.

1.   Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ] .  The

display reads:

CENTRAL TEL PROG

Extension:

2.   Enter the extension to be programmed.  For example, to program exten-

sion 27, press [ 2 ] [ 7 ] .  The display reads:

PROGRAM EXT 27

3.   Select a button to program by pressing any programmable button.

4.   Press the left [ Intercom ] button, followed by [ 6 ] [ 6 ] .  The display reads:

Call Pickup–Grp

To program another feature on this extension, go to step 3 for that feature.

4-12  Centralized Telephone Programming