Sony LDI-100B User Manual
23
-US
Operations
Adjusting the sound/picture
You can adjust the following items using the menu display.
PC mode (RGB signal)
Video mode (video signal)
AVLS (Auto Volume Limiter System):
Keeps the maximum volume down to protect your ear. You cannot turn up the volume beyond the
defined limit even if you try to turn the VOL control.
defined limit even if you try to turn the VOL control.
MEGA BASS:
Creates a deep, powerful sound by emphasizing the bass sound.
POWER SAVE:
The POWER SAVING SENSOR detects the removal of the Personal LCD Display from your head.
The unit enters standby mode in a few seconds, automatically stopping the sound and picture in order to
save the battery power. The sound and picture resume after a few seconds when you put on the Personal
LCD Display again.
The unit enters standby mode in a few seconds, automatically stopping the sound and picture in order to
save the battery power. The sound and picture resume after a few seconds when you put on the Personal
LCD Display again.
V CENT:
Adjusts the vertical position of the
picture.
picture.
H CENT:
Adjusts the horizontal position of the
picture.
picture.
TRACKING:
Adjusts the tracking of the picture
(e.g., if the picture is not displayed
clearly).
(e.g., if the picture is not displayed
clearly).
SYNC:
Adjusts the picture with the RGB signal
synchronization (e.g., if the picture is
blurred, or if red or blue shadows appear
in the picture). Perform this adjustment
after TRACKING adjustment is
finished.
synchronization (e.g., if the picture is
blurred, or if red or blue shadows appear
in the picture). Perform this adjustment
after TRACKING adjustment is
finished.
CONTRAST:
Adjusts the picture contrast.
HUE (NTSC (VIDEO) mode only):
Adjusts the hue, if the picture looks too
red or green.
red or green.
COLOR:
Adjusts the color intensity.
Notes on power saving function
• The power saving function may not work correctly in the following cases:
– your hair is between your forehead and the POWER SAVING SENSOR.
– the space or angle between your forehead and the POWER SAVING SENSOR is not correct.
In these cases, set POWER SAVE to OFF.
– the space or angle between your forehead and the POWER SAVING SENSOR is not correct.
In these cases, set POWER SAVE to OFF.
• When the picture disappears suddenly, do the following procedures:
1
Turn off the power sliding the POWER switch.
2
Turn on the power again.
3
Press MENU to display the menu options.
4
Set POWER SAVE to OFF.
continued