Husqvarna LOGTH2448T User Manual

23

02966

A

A

4.   If adjustment is necessary, see steps 2 

and 3 in Visual Adjustment instructions 
above.

5.   Recheck measurements, adjust if nec-

essary until both sides are equal.

02548

FRONT-TO-BACK ADJUSTMENT
IMPORTANT:  Deck must be level side-
to-side.
To obtain the best cutting re sults, the 
mower blades should be adjusted so the 
front tip is 1/8" to 1/2" lower than the rear 
tip when the mower is in its highest posi-
tion.

  CAUTION: Blades are sharp. Protect 

your hands with gloves and/or wrap blade 
with heavy cloth.
•   Raise mower to highest position.
•   Position any blade so the tip is pointing 

straight forward. Measure distance (B) 
to the ground at front and rear tip of the 
blade.

•   If front tip of blade is not 1/8" to 1/2" 

lower than the rear tip, go to the front of 
tractor.

•   With an 11/16" or adjustable wrench, 

loosen jam nut A several turns to clear 
adjustment nut B.

•   With a 3/4" or adjustable wrench, turn 

front link adjustment nut (B) clockwise 
(tighten) to raise the front of mower, or, 
counterclockwise (loosen) to lower the 
front mower.

NOTE:  Each full turn of the adjustment 
nut will change mower height about 1/8".
•   Recheck measurements, adjust if nec-

essary until front tip of blade is 1/8" to 
1/2" lower than the rear tip.

•   Hold adjustment nut in position with 

wrench and tighten jam nut securely 
against adjustment nut.

MOWER DRIVE BELT REMOVAL 
1.   Park tractor on a level surface. En gage 

parking brake.

2.   Lower attachment lift lever to its lowest 

position.

3.   Disengage belt tension rod (K) from 

lock bracket (L).

  CAUTION: Belt tension rod is spring 

loaded. Have a fi rm grip on rod and re-
lease slowly.
4.   Remove screws (P) from R.H. and L.H. 

mandrel covers and remove covers 
(Q).

02950

Tighten adjust nut
B to raise mower

Loosen adjust nut
B to lower mower

Loosen jam nut A fi rst