Kenwood TK-3230 User Manual

•  While adjusting the VOX Delay Time, speak into the

microphone to simulate transmitting. The LED lights orange

while speaking, but no signal is transmitted at this time.

 Press the MENU key to exit the selection.

 Press the PTT, MON, or CAL key to exit Setting Mode.

While using VOX, you can set the transceiver to detect when

the channel is in use (in place of using the Monitor function).

With this function turned on, VOX will not allow you to transmit

while the channel is being used. You can transmit only when

the channel is free. Setting up the proceed tone function

{page 23} will notify you when the channel is free.
1

 With the transceiver power OFF, press and hold the MENU 

key while turning the transceiver power ON (for 1 second).

 Press the   or   key to select “   ”.

 Press the MENU key then press   or   to select “

”

(transmit inhibit while receiving on) or “

” (transmit

inhibit while receiving off).

 Press the MENU key to exit the selection.

 Press the PTT, MON, or CAL key to exit Setting Mode.