Jenn-Air 720-0100-NG User Manual

 

 
 

Inspect the gas supply hose prior to turning on 
the gas. If there is evidence of cuts, wear or 
abrasion, it must be replaced prior to use. Do not 
use the side burner if gas odor is present. 
 

Always keep your face and body as far away from 
the burner as possible when lighting. 
 
LIGHTING INSTRUCTIONS 
1.  Remove any cooking utensils from the burner 

grate and open the top cover or lid.  

 
2.  Push and turn the control knob 

counterclockwise to the “HI” setting. 

 
3.  If the burner does not light, turn the control 

knob to the “OFF” position.  

 
 

4.  If the smell of gas is detected and the igniter 

is not functioning, immediately turn the control 
knob to the “OFF” position.  

 
5.  Allow 5 minutes for any accumulated gas to 

dissipate. If the side burner igniter will not 
function, follow the match lighting instructions. 

 
 
MATCH LIGHTING 
1.  Hold a lit extended match or lighter near the 

side burner ports. 

 
2.  Turn the control knob counterclockwise to the 

“HI” setting. 

 
3.  Rotate the control knob to the desired setting.

 
 

 

 
 
 
 
 
 
 

BURNER CLEANING 
Clean the exterior of the burner with a wire 
brush. Clear any clogged burner ports with a 
straightened paper clip. Never enlarge the 
burner ports. Never use a wooden toothpick as 
it may break off and clog the port. 

STAINLESS STEEL 
There are many stainless steel cleaners 
available.  Always use the mildest cleaning 
procedure first, scrubbing in the direction of the 
grain.  Do not use steel wool as it will scratch 
the surface.   
 
To touch up noticeable scratches in the 
stainless steel, sand very lightly with dry 100 
grit sand paper in the direction of the grain.