KitchenAid KBSS271T User Manual

Page of 48
22
4. Turn knob to OFF and let cool completely.
5. Remove grill grate and brush off ash particles from the sear 
burner cover plate.
6. Replace grill grate.
DRIP TRAY
IMPORTANT: The drip tray should only be removed when grill is 
completely cool.
The full-width drip tray collects grease and food particles that fall 
through the grill. Clean often to avoid grease buildup. 
Cleaning Method:
Remove tray and set on a flat surface.
Wipe excess grease with paper towels.
Clean with mild detergent and warm water. Rinse and dry 
thoroughly.
Replace tray.
KNOBS AND FLANGE AREA AROUND KNOBS
IMPORTANT: Do not use steel wool, abrasive cleaners, or oven 
cleaner.
Do not soak knobs.
Cleaning Method:
Clean with mild detergent, a soft cloth and warm water.
Rinse and dry.
CONTROL PANEL GRAPHICS
IMPORTANT: Do not use steel wool, abrasive cleaners or oven 
cleaner.
Do not spray cleaner directly onto panel.
Cleaning Method:
Clean around the burner labels gently; scrubbing may remove 
printing.
Clean with mild detergent, soft cloth and warm water.
Rinse and dry.
ROTISSERIE SPIT ROD AND FORKS (on some models)
Cleaning Method:
Wash with mild detergent, using a soft cloth and warm water.
Rinse and dry.
For stubborn areas, use a multi-purpose cleaner, a heavy-
duty scrub sponge or mild abrasive cleaner.
RACKS
Cleaning Method:
Steel-wool pad and warm, soapy water:
Wash, rinse and dry thoroughly.
TROUBLESHOOTING
Try the solutions suggested here first in order to avoid the 
cost of an unnecessary service call.
Nothing will operate
Is the main or regulator gas shutoff valve in the off 
position?
See Installation Instructions.
Is the grill properly connected to the gas supply?
Contact a trained repair specialist or see Installation 
Instructions.
Is the power supply cord unplugged?
Plug into a grounded 3 prong outlet.
Has a household fuse blown, or has a circuit breaker 
tripped?
Replace the fuse or reset the circuit breaker. If the problem 
continues, call an electrician.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, 
fire, or electrical shock.
WARNING