Broilmaster R3-1 User Manual

B101623-5-1012

Page 32

Before cooking on a grill for the first time, it should be broken in to 

burn off any oil residue from the manufacturing process.

1.  Raise the grill lid.

2.  Light grill burner.

3.  Burn on HI for ten minutes.

4.  Close the lid and burn on HI for an additional ten minutes.  

5.  Turn OFF gas.  The grill is now ready for use.

Before cooking on a gas grill, allow the grill to preheat on HI for 5 

minutes with the lid closed.

This uses very little fuel and provides better flavor.

If an electrical accessory (e.g. rotisserie) is used on your grill, the 

accessory must be electrically grounded in accordance with local 

codes or, in the absence of local codes, with the National Electric 

Code, ANSI/NFPA 70.  In Canada, the electrical accessory must 

be electrically grounded in accordance with the applicable section 

of the current Canadian Electrical Code, CSA C22.1.

Any electrical accessory should be equipped with a three-prong 

(grounding) plug, and plugged into a properly grounded three-prong 

receptacle or wall outlet.  Do not cut or remove the grounding prong 

from the plug.  

If an extension cord is required, use only a three-prong cord and 

plug into a properly grounded receptacle as described above.

Do not expose an electrical accessory to water.  Avoid using any 

electrical accessory in wet weather as it may present a shock 

hazard.  

Keep any electrical cord and fuel supply hose away from all heated 

surfaces.