Cal Flame LTR20091006 User Manual
Installation /
Assemb
ly
13
2009 Fireplaces and Firepits
LTR20091006, Rev. B
www.calspas.com
Fire Pit Burner Installation
The log set and crushed lava rock are shipped together on applicable
models. Remove the log set and un-pack all components. The logs are
fragile -- use care when handling.
Turn the fire pit on its side. Connect the piezoelectric starter and attach
Turn the fire pit on its side. Connect the piezoelectric starter and attach
the flex hose for the gas supply.
Place the fire pit back down on its pedestal. Attach the gas flex hose
to the burner.
Note: If you want to convert the orifice from LP to NG, this is location
of the orifice. See next page for gas converstion instructions.