Rangemaster U109650-02 User Manual
31
SERVICING - WARNING
Disconnect from the electricity before servicing. Check appliance is safe when you have finished.
19 To Remove the Left hand Oven Bottom and Top
Elements
Disconnect from the electricity supply.
Bottom Element
Pull the cooker forward to access the cover boxes at the rear
of the unit. Remove the fixings that secure the cover and lift
it clear.
of the unit. Remove the fixings that secure the cover and lift
it clear.
Remove the 2 screws ‘A’ and allow the plate to drop down.
Remove the 2 screws B, holding the element to the bottom
sheet.
Disconnect the leads, noting their positions.
Withdraw bottom element. Fit the new element and re-
assemble parts in reverse order.
sheet.
Disconnect the leads, noting their positions.
Withdraw bottom element. Fit the new element and re-
assemble parts in reverse order.
Top Element
Open the Left hand oven door and undo the fixings that
secure the heat shield. Remove the top element bracket
fixings and withdraw element. Replace the element and
re-assemble parts in reverse order. Check that the oven
operates satisfactorily.
secure the heat shield. Remove the top element bracket
fixings and withdraw element. Replace the element and
re-assemble parts in reverse order. Check that the oven
operates satisfactorily.
20. To change oven light bulb.
Disconnect from the electricity supply.
Remove the oven furniture. Unscrew the bulb.
Fit an Edison screw fitting 15w 125-130v lamp, FOR OVENS.
It must be a special bulb, heat resistant to 300°C
Remove the oven furniture. Unscrew the bulb.
Fit an Edison screw fitting 15w 125-130v lamp, FOR OVENS.
It must be a special bulb, heat resistant to 300°C