Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. 3-300-703-11(2)
  5. User Manual

Sony 3-300-703-11(2) User Manual

Download
Page of 56
20
GB
Listening to the radio
Use buttons on the remote for the 
operation.
1
Press FUNCTION +/– repeatedly 
to select FM or AM band.
2
Press TUNING MODE repeatedly 
until “AUTO” lights up in the 
display.
3
Press +/–.
You can also use TUNE +/– on the 
unit.
Scanning stops automatically when a 
station is tuned in and “TUNED” lights 
up in the display. When a FM stereo 
program is tuned in, “STEREO” lights 
up in the display.
Note
If “TUNED” does not light up and scanning 
does not stop, see “To tune in a station with 
a weak signal” below.
4
Press VOLUME +/– to adjust the 
volume.
To stop automatic scanning
Press x.
To tune in a station with a weak 
signal
Use buttons on the remote for the 
operation.
1
Press TUNING MODE repeatedly 
until “AUTO” and “PRESET” 
disappear from the display. 
2
Press +/– repeatedly to tune in the 
station you want.
You can also use TUNE +/– on the 
unit.
To change the AM tuning interval 
(Except for European model)
The factory setting for AM tuning interval 
is 9 kHz (or 10 kHz for some areas).
Use the buttons on the unit for the 
operation.
1
Press TUNER/BAND repeatedly to 
select AM band.
2
Press "/1 to turn off the system.
3
When demonstration appears, hold 
down ENTER on CHANNEL B and 
then press "/1.
The system turn on automatically.
“AM 9K STEP” or “AM 10K STEP” 
appears in the display.
When you change the interval, all the AM 
preset stations are erased.
Tip
To improve broadcast reception, adjust the 
supplied antennas, or connect an external 
antenna.
To reduce static noise on a weak FM 
stereo station
Press FM MODE on the remote 
repeatedly until “MONO” lights up in the 
display. 
There will be no stereo effect, but the 
reception will improve.