Sony 3-300-703-11(2) User Manual
32
GB
Changing the display
1
1
Press OPTIONS.
2
Turn JOG DIAL to select
“ILLUM”, then press ENTER.
“ILLUM”, then press ENTER.
3
Turn JOG DIAL to select the
setting you want.
setting you want.
4
Press ENTER.
To exit the OPTIONS menu
Press OPTIONS again.
Press DISPLAY repeatedly while
the system is turned off.
You can select the following display
mode.
the system is turned off.
You can select the following display
mode.
Demonstration
1)
The display changes and the indicators
flash even when the system is turned off.
flash even when the system is turned off.
No display (Power Saving Mode)
1)2)
The display is turned off to conserve
power. The timer and clock continue to
operate.
power. The timer and clock continue to
operate.
Clock
The clock is displayed. The clock display
automatically turns to Power Saving
Mode after a few seconds. However, the
display returns to clock display when you
connect an iPod.
automatically turns to Power Saving
Mode after a few seconds. However, the
display returns to clock display when you
connect an iPod.
3)
1)
When an iPod is connected, the display
change to clock. If you remove the iPod, the
display changes to Power Saving Mode after a
few seconds.
change to clock. If you remove the iPod, the
display changes to Power Saving Mode after a
few seconds.
2)
You cannot perform the following operations
during Power Saving Mode:
– Setting the clock (page 17).
– Changing the AM tuning interval (page 20).
– Turning on the system by pressing the
during Power Saving Mode:
– Setting the clock (page 17).
– Changing the AM tuning interval (page 20).
– Turning on the system by pressing the
function buttons.
3)
The clock is displayed continuously while the
iPod is being charged. To turn off the clock
display, press DISPLAY (see “To stop
charging the iPod” (page 28)).
iPod is being charged. To turn off the clock
display, press DISPLAY (see “To stop
charging the iPod” (page 28)).
Changing the display mode