Sony MZ-N510 User Manual
24
To start/stop recording
in sync with the sound
source
(Synchro-recording)
in sync with the sound
source
(Synchro-recording)
During synchro-recording, the recorder
starts and stops recording in sync with the
sound source. When recording from
digital equipment (such as a CD player),
you can omit operating both the recorder
and the sound source, and easily make
digital recording. You can make synchro-
recording only when the optical cable is
connected.
starts and stops recording in sync with the
sound source. When recording from
digital equipment (such as a CD player),
you can omit operating both the recorder
and the sound source, and easily make
digital recording. You can make synchro-
recording only when the optical cable is
connected.
1
Make connections.
Use the appropriate optical cable to
suit the source equipment. Connect
the cable firmly to the appropriate
jacks.
suit the source equipment. Connect
the cable firmly to the appropriate
jacks.
2
While the recorder is stopped, press
MENU.
MENU.
3
Press . or > repeatedly until
“R-SET” appears in the display, and
then press ENTER.
“R-SET” appears in the display, and
then press ENTER.
4
Press . or > repeatedly until
“SYNC-R” appears in the display,
and then press ENTER.
“SYNC-R” appears in the display,
and then press ENTER.
5
Press . or > repeatedly until
“ON” appears in the display, and then
press ENTER.
“ON” appears in the display, and then
press ENTER.
6
Press
N
while pressing REC •
T MARK.
The recorder stands by for recording.
7
Play the source you want to record.
The recorder stars recording
automatically when it receives the
playing sound. “REC” light up in the
display.
automatically when it receives the
playing sound. “REC” light up in the
display.
To stop recording
Press x.
z
When there is no sound from the player for
about 3 seconds during synchro-recording, the
recorder goes into the standby mode
automatically. When the sound comes from the
player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby
mode for 5 minutes or longer, the recorder stops
automatically.
about 3 seconds during synchro-recording, the
recorder goes into the standby mode
automatically. When the sound comes from the
player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby
mode for 5 minutes or longer, the recorder stops
automatically.
Notes
•
The pause function cannot be turned on or off
manually during synchro-recording. Press
manually during synchro-recording. Press
x
to stop recording.
•
Do not switch the “SYNC-R” setting while
recording. Recording may not be done
properly.
recording. Recording may not be done
properly.
•
Even when there is no sound on the sound
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
•
If a silent portion is encountered for
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
REC • T MARK
MENU
4-way control key
(ENTER • N, ., >, x)
(ENTER • N, ., >, x)