3com WXR100 3CRWXR10095A User Manual
100
C
HAPTER
4: P
ORT
C
OMMANDS
See Also
set port type
wired-auth
wired-auth
Configures a WX switch port for a wired authentication user.
Before changing the port type from ap to wired-auth or from
wired-auth to ap, you must reset the port with the clear port type
command.
wired-auth to ap, you must reset the port with the clear port type
command.
Syntax —
set port type wired-auth port-list [tag tag-list]
[max-sessions num] [auth-fall-thru {last-resort | none |
web-portal}]
port-list
— List of physical ports.
tag-list
— One or more numbers between 1 and 4094 that
subdivide a wired authentication port into virtual ports.
num
— Maximum number of simultaneous user sessions supported.
last-resort
— Automatically authenticates the user, without
requiring a username and password.
none
— Denies authentication and prohibits the user from accessing
the network over this port.
web-portal
— Serves the user a web page from the WX switch’s
nonvolatile storage for secure login to the network.
Defaults — The default tag-list is null (no tag values). The default
number of sessions is 1. The default fallthru authentication type is none.
number of sessions is 1. The default fallthru authentication type is none.
Access — Enabled.
History—Introduced in MSS Version 3.0. Option for WebAAA fallthru
authentication type changed from web-auth to web-portal in MSS
Version 4.0.
authentication type changed from web-auth to web-portal in MSS
Version 4.0.