3com WXR100 3CRWXR10095A User Manual
display roaming vlan
115
display roaming
vlan
vlan
Shows all VLANs in the mobility domain, the WX switches servicing the
VLANs, and their tunnel affinity values configured on each switch for the
VLANs.
VLANs, and their tunnel affinity values configured on each switch for the
VLANs.
Syntax —
display roaming vlan
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the current roaming
VLANs:
VLANs:
WX4400# display roaming vlan
VLAN WX
Affinity
---------------- --------------- --------
vlan-cs 192.168.14.2 5
vlan-eng 192.168.14.4 5
vlan-fin 192.168.14.2 5
vlan-it 192.168.14.4 5
vlan-it 192.168.14.2 5
vlan-pm 192.168.14.2 5
vlan-sm 192.168.14.2 5
vlan-tp 192.168.14.4 5
vlan-tp 192.168.14.2 5
Table 22 describes the fields in the display.
See Also
Table 22 Output for display roaming vlan
Field
Description
VLAN
VLAN name.
WX
System IP address of the wireless LAN switch on which the
VLAN is configured.
VLAN is configured.
Affinity
Preference of this WX switch for forwarding user traffic for
the VLAN. A higher number indicates a greater preference.
the VLAN. A higher number indicates a greater preference.