3com WXR100 3CRWXR10095A User Manual
176
C
HAPTER
7: IP S
ERVICES
C
OMMANDS
Aliases take precedence over DNS. When you enter a hostname, MSS checks
for an alias with that name first, before using DNS to resolve the name.
for an alias with that name first, before using DNS to resolve the name.
Examples — The following command configures the default domain
name example.com:
name example.com:
WX1200# set ip dns domain example.com
Domain name changed
See Also
set ip dns server
Specifies a DNS server to use for resolving hostnames you enter in CLI
commands.
commands.
Syntax —
set ip dns server ip-addr {primary | secondary}
ip-addr
— IP address of a DNS server, in dotted decimal or CIDR
notation.
primary
— Makes the server the primary server, which MSS always
consults first for resolving DNS queries.
secondary
— Makes the server a secondary server. MSS consults a
secondary server only if the primary server does not reply.
Defaults — None.
Access — Enabled.
Usage — You can configure a WX to use one primary DNS server and up
to five secondary DNS servers.
to five secondary DNS servers.
Examples — The following commands configure a WX to use a primary
DNS server and two secondary DNS servers:
DNS server and two secondary DNS servers:
WX1200# set ip dns server 10.10.10.50/24 primary
success: change accepted.
WX1200# set ip dns server 10.10.20.69/24 secondary