3com WXR100 3CRWXR10095A User Manual
198
C
HAPTER
7: IP S
ERVICES
C
OMMANDS
set snmp security
Sets the minimum level of security MSS requires for SNMP message
exchanges.
exchanges.
Syntax —
set snmp security
{unsecured | authenticated | encrypted | auth-req-unsec-notify}
unsecured
— SNMP message exchanges are not secure. This is the
only value supported for SNMPv1 and SNMPv2c.
authenticated
— SNMP message exchanges are authenticated but
are not encrypted.
encrypted
— SNMP message exchanges are authenticated and
encrypted.
auth-req-unsec-notify
— SNMP message exchanges are
authenticated but are not encrypted, and notifications are neither
authenticated nor encrypted.
authenticated nor encrypted.
Defaults — By default, MSS allows nonsecure (unsecured) SNMP
message exchanges.
message exchanges.
Access — Enabled.
History — Introduced in MSS Version 4.0.
Usage — SNMPv1 and SNMPv2c do not support authentication or
encryption. If you plan to use SNMPv1 or SNMPv2c, leave the minimum
level of SNMP security set to unsecured.
encryption. If you plan to use SNMPv1 or SNMPv2c, leave the minimum
level of SNMP security set to unsecured.
Examples — The following command sets the minimum level of SNMP
security allowed to authentication and encryption:
security allowed to authentication and encryption:
WX1200# set snmp security encrypted
success: change accepted.
See Also