3com WXR100 3CRWXR10095A User Manual

C

HAPTER

 9: M

OBILITY

 D

OMAIN

 C

OMMANDS

 — 

The following command configures this WX as the 

secondary seed in a 

Mobility Domain named Pleasanton:

WX# set mobility-domain mode secondary-seed domain-name 

mode is: secondary-seed

domain name is: Pleasanton

„

„

Creates a Mobility Domain by setting the current WX as the seed device 
and naming the Mobility Domain.

Syntax — 

„

 — Name of the Mobility Domain. Specify between 

1 and 32 characters with no spaces.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0. Version 4.2 increased the 
maximum length of mob-domain-name to 32 characters.

Usage — Before you use this command, the current WX must have its IP 
address set with the set system ip-address command. After you enter 
this command, all Mobility Domain traffic is sent and received from the 
specified IP address.

You must explicitly configure only one WX switch per domain as the seed. 
All other WX switches in the domain receive their Mobility Domain 
information from the seed.

Examples — The following command creates a Mobility Domain named 
Pleasanton with the current WX as the seed:

WX4400# set mobility-domain mode seed domain-name Pleasanton

mode is: seed

domain name is: Pleasanton