3com WXR100 3CRWXR10095A User Manual

Removes the specified Network Domain seed from the WX configuration. 
When you enter this command, the Network Domain TCP connections 
between the WX switch and the specified Network Domain seed are 
closed.

Syntax — 

clear network-domain seed-ip ip-addr

„

— IP address of the Network Domain seed in dotted decimal notation.

Defaults — None.

Access — Enabled.

History —Introduced in MSS 4.1.

Usage — This command has no effect if the WX is not configured as part of 
a Network Domain, or if the WX is not configured as a member of a Network 
Domain that uses the specified Network Domain seed.

The following command removes the Network Domain seed with IP 
address 192.168.9.254 from the WX configuration:

WX1200# clear network-domain seed-ip 192.168.9.254

success: change accepted.

„