3com WXR100 3CRWXR10095A User Manual

Displays Distributed MAPs that are physically connected to the network 
but that are not configured on any WX switches.

Syntax — 

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0. Version 6.0 removed the dap 
option.

Usage — This command also displays a MAP that is directly connected to 
a WX switch, if the WX port to which the MAP is connected is configured 
as a network port instead of a MAP access port, and if the network port is 
a member of a VLAN.

If a Distributed MAP is configured on a WX switch in another Mobility 
Domain, the MAP can appear in the output until the MAP is able to 
establish a connection with a WX switch in its Mobility Domain. After the 
MAP establishes a connection, the entry for the MAP ages out and no 
longer appears in the command’s output.

Entries in the command output’s table age out after two minutes. 

Examples — The following command displays information for two 
Distributed MAPs that are not configured:

WX1200# display ap unconfigured 

Total number of entries: 2

Serial Id   

Model  IP Address      Port Vlan

------------- ------ --------------- ---- --------

M9DE48B012F00 AP2750 10.3.8.54       5    default

M9DE48B123400 AP2750 10.3.8.57       6

 vlan-eng

Table 67 describes the fields in this display.

Table 67   Output for display ap unconfigured

Serial Id

Serial ID of the MAP.

Model

MAP model number.