3com WXR100 3CRWXR10095A User Manual
470
C
HAPTER
11: M
ANAGED
A
CCESS
P
OINT
C
OMMANDS
beacon-rate:
11a—6.0
11b—2.0
11g—2.0
multicast-rate—auto for all radio types.
Access — Enabled.
History —Introduced in MSS Version 4.2.
Usage — If you disable a rate, you cannot use the rate as a mandatory
rate or the beacon or multicast rate. All rates that are applicable to the
radio type and that are not disabled are supported by the radio.
rate or the beacon or multicast rate. All rates that are applicable to the
radio type and that are not disabled are supported by the radio.
Examples — The following command sets 802.11a mandatory rates for
service profile sp1 to 6 Mbps and 9 Mbps, disables rates 48 Mbps and
54 Mbps, and changes the beacon rate to 9 Mbps:
service profile sp1 to 6 Mbps and 9 Mbps, disables rates 48 Mbps and
54 Mbps, and changes the beacon rate to 9 Mbps:
WX4400# set service-profile sp1 transmit-rates 11a mandatory
6.0,9.0 disabled 48.0,54.0 beacon-rate 9.0
success: change accepted.
See Also
set service-profile
use-client-dscp
use-client-dscp
Configures MSS to classify the QoS level of IP packets based on their
DSCP value, instead of their 802.11 priority.
DSCP value, instead of their 802.11 priority.
Syntax —
set service-profile name user-client-dscp
{enable | disable}
name
— Service profile name.
enabled
— Enables mapping QoS level from the DSCP level.
disabled
— Disables mapping QoS level from the DSCP level.
Defaults
—
Disabled.
Access
—
Enabled.
History
—
Introduced in MSS Version 6.0.