3com WXR100 3CRWXR10095A User Manual
set spantree portvlanpri
509
set spantree
portvlanpri
portvlanpri
Changes the priority of a network port or ports for selection as part of
the path to the STP root bridge, on one VLAN or all VLANs.
the path to the STP root bridge, on one VLAN or all VLANs.
Syntax —
set spantree portvlanpri
port-list priority value {all | vlan vlan-id}
port-list
— List of ports. MSS changes the priority on the specified
ports.
priority
value
— Priority value. You can specify a value from 0
(highest priority) through 255 (lowest priority).
all
— Changes the priority on all VLANs.
vlan
vlan-id
— VLAN name or number. MSS changes the priority on
only the specified VLAN.
Defaults — The default STP priority for all network ports is 128.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command sets the priority of ports 3 and 4 to
48 on VLAN mauve:
48 on VLAN mauve:
WX1200# set spantree portvlanpri 3-4 priority 48 vlan mauve
success: change accepted.
See Also