3com WXR100 3CRWXR10095A User Manual
518
C
HAPTER
13: IGMP S
NOOPING
C
OMMANDS
See Also
display igmp
mrouter
mrouter
Displays the multicast routers in a WX’s subnet, on one VLAN or all
VLANs. Routers are listed separately for each VLAN, according to the port
number through which the wireless LAN switch can reach the router.
VLANs. Routers are listed separately for each VLAN, according to the port
number through which the wireless LAN switch can reach the router.
Syntax —
display igmp mrouter [vlan vlan-id]
vlan vlan-id
— VLAN name or number. If you do not specify a
VLAN, MSS displays the multicast routers in all VLANs.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the multicast routers in
VLAN orange:
VLAN orange:
WX1200# display igmp mrouter vlan orange
Multicast routers for vlan orange
Port Mrouter-IPaddr Mrouter-MAC
Type TTL
---- --------------- ----------------- ----- -----
1
192.28.7.5 00:01:02:03:04:05 dvmrp
33
Table 82 describes the fields in this display.
VLAN
VLAN name. MSS displays information separately for each
VLAN.
VLAN.
IGMP is enabled
(disabled)
(disabled)
IGMP state.
Table 81 Output for display igmp (continued)
Field
Description