D-Link DWC-1000 User Manual
Wireless Controller
User Manual
89
previous iterations cannot be assigned new channels in the next iteration to
prevent the same APs from being changed time after time.
Last Algorithm Time: Shows the date and time when the channel plan
algorithm last ran.
AP MAC Address: This table displays the channel assigned to an AP in an
iteration of the channel plan (Location, Radio,Iteration, Channel)
Figure 54 : Cha nnel Pla n History
.
RF Management (Manual Channel Plan)
Setup > AP Management > RF Management > Manual Channel Plan
If you specify Manual as the Channel Plan Mode on the Configuration tab, the
Manual Channel Plan page allows you to initiate the channel plan algo rithm. To
manually run the channel plan adjustment feature, select the radio to update the
channels on (5 GHz or 2.4 GHz) and click Start.
Manual Channel Plan page allows you to initiate the channel plan algo rithm. To
manually run the channel plan adjustment feature, select the radio to update the
channels on (5 GHz or 2.4 GHz) and click Start.
Channel Plan: The 5 GHz and 2.4 GHz radios use different channel plans, so
the controller tracks the channel history separately for each radio. The channel
information that displays on the page is only for the radio you select.
Channel plan algorithm (Current Status): Shows the Current Status of the plan,
which is one of the following states:
• None: The channel plan algorithm has not been manually run since the last
controller reboot.
• Algorithm in Progress: The channel plan algorithm is running.