Sony CDX-S2200 User Manual
19
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SEL)
for 2 seconds while
pushing the VOL control.
Adjusting the balance and
fader
fader
You can adjust the balance and fader.
1
Press
(SEL)
repeatedly until “BAL” or
“FAD” appears.
Each time you press (SEL), the item changes
as follows:
as follows:
LOW
*
t
MID
*
t
HI
*
t
BAL (left-right)
t
FAD (front-rear)
*
When EQ3 is activated (page 20).
2
Press the volume +/– button to adjust
the selected item.
the selected item.
Note
Adjust within 3 seconds after selecting the item.
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
sound
Press
(ATT)
.
After “ATT-ON” momentarily appears,
“ATT” appears in the display.
“ATT” appears in the display.
To restore the previous volume level, press
(ATT) again.
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
To increase
To decrease