Solid State Logic 82BN0M01B User Manual

Nucleus User Guide

Page 35

V-Pot and V-Sel Control

The channel V-Pots and V-Sel switches below the digital display fulfill a number of different

DAW-specific functions. The V-Pot value is displayed using the LEDs surrounding it and the

small red LED beneath indicates that the V-Sel switch is in its active position (as shown right).

Note that the V-Sel switch is activated by pressing on the V-Pot. Note also that the Mode

switches do not hold any function specific to the channel strip in which they are located.

Nucleus’ Pro Tools and Logic profiles come programmed with a number of essential V-Pot

modes assigned to the Mode switches above the left-hand display. These are printed below

the switches. Full lists of default assignments are listed in the Appendix.

Mode switch 16 – labelled ‘KeybID’, on the far right-hand side – also comes pre-assigned, to the ‘Keyboard ID’ function. This

function is required for part of the USB set up as described in Section 4.

Note that Mode switch assignments do not appear in the scribble strip display. If you change a Mode switch function

or assign functions to the right-hand Mode switches, we suggest creating your own labels to indicate the new function.

The right-hand Mode switches are not available if User 1 or User 2 (user soft keys) are selected.

Note also that the functions assigned to the Mode switches are programmed in the Nucleus Remote. See Section 5 for

more information.

Flip Mode

Pressing the FLIP switch to the right of the left-hand display, triggers the HUI ‘Shift’ command or the MCU ‘Flip’ command,

and assigns the V-Pot parameter to the fader.

Pro Tools users: FLIP only works on Sends A to E. In FLIP mode, the send pan control is assigned to the V-Pot.

OOLS

The default Mode switch functions are shown in white

boxes immediately beneath the switches. They are:

DEFAULT

Initialises selected values: Hold DEFAULT

and press V-Pot to set it to 0dB (sends) or

centre (pan), or SEL to set fader to 0dB

MUTE

When V-Pots are assigned to a Send, MUTE

switches the V-Sel function between

mute/unmute and pre/post switching

SEND A to E

Assigns control of Sends A to E to V-Pots

PAN

Assigns V-Pots to the channel pan function

OGIC

The default Mode switch functions are shown in white text,

immediately above the display. Use the SEL switches to

select the channel to which modes are applied. Some

functions involve holding a Mode key and pressing a V-Sel:

INSTRUMENT Opens the instrument editor on an

instrument track

PLUG IN

Opens the plug-in editor

Opens the EQ editor

PAN

Assigns pan control to the V-Sel switches

SEND

Opens the Sends editor

TRACK

Assigns channel parameters to V-Pots

Turn for V-Pot

Press for V-Sel

V-Sel

status

V-Pot

level