Panasonic CQ-C9801U User Manual

21

20

Press [SRC] (Source) to select the

radio mode.

Press [BAND] to select a band.

¡

For tuning in on only stations whose receiving condi-
tions are good in the station search, set LOCAL to ON.
(

a

page 23)

¡

For reducing noise when a receiving FM stereo wave
is weak, set MONO to ON. (

a

page 23)

Select a station.

[]] (TUNE):

Lower

[[] (TUNE):

Higher

Note: Hold down for 0.5 sec. or more and release
for station search.

[{] (P·SET: Preset):

Lower preset number

[}] (P·SET: Preset):

Higher preset number

¡

Direct Access can be executed with  [1] to [6]
buttons on remote control.

¡

Stations in FM 1 to 3 are sequentially selectable
without changing bands when “ALL BAND” is
selected in “AUTO PRESET”. 

Band

Frequency

Lights when LOCAL is
activated. 

(

a

page 23)

Preset Number

Lights while receiving an FM stereo signal.

(“STEREO”: CQ-C9801U, CQ-C9701U)

Lights when MONO is activated.

(

a

page 23)

Indicates the intensity of
the radio wave.

A radio DSP is integrated into this unit. The IF filter allows the radio to adjust the bandwidth automatically to maintain optimum
reception.

You can make a fine adjustment of SQ and Position.

Set the SQ mode to on.

Hold down [CS] (SQ) for 2 sec. or more

to display the audio menu display.

Press [

}

] or [

{

] to select a function to

be adjusted.

Press [BAND]

(SET) to adjust.

Adjust the setting value.

[}][{][]][[

: Select

[BAND] (SET):

Confirm

Press [DISP] to confirm the adjustment.

Select your favorite type from 6 kinds of SQ Presets.

Note: You can also select the SQ preset number by
pressing [1] to [6] on the remote control.

You can make a fine adjustment to the currently selected
SQ presetting in each type (except FLAT).

]

[

]:

Frequency band
selection

qw:

Frequency selection

}

{

]: Level up/down

Note: If you hold down [BAND] for 2 sec. or more, the
presetting that is called up can be turned into the default.

The current value is assigned to one of SQ preset 2 to 6.

Select a preset number by pressing 

[}],

[{], []]

or 

[[]

.

Hold down 

for 2 sec. or more.

Note: You can also select the SQ preset number by
pressing [2] to [6] on the remote control, and assign the
current value to the selected preset number by holding
down the same button for 2 sec. or more.

You can make the optimal sound field in accordance with
your seat.