3com WX2200 3CRWX220095A User Manual

„

„

Creates a USM user for SNMPv3.

Syntax — 

set snmp usm usm-username 

snmp-engine-id {ip ip-addr | local | hex hex-string} 

auth-type {none | md5 | sha} {auth-pass-phrase string | 

auth-key hex-string}

string | encrypt-key hex-string}

„

 — Name of the SNMPv3 user. Specify between 1 and 

32 alphanumeric characters, with no spaces.

„

snmp-engine-id {ip ip-addr | local | hex hex-string} — 

Specifies a unique identifier for the SNMP engine. To send informs, 
you must specify the engine ID of the inform receiver. To send traps 
and to allow get and set operations and so on, specify local as the 
engine ID.

„

hex hex-string

—ID is a hexadecimal string. 

„

ip ip-addr

—ID is based on the IP address of the station running 

the management application. Enter the IP address of the station. 
MSS calculates the engine ID based on the address. 

„

— Uses the value computed from the switch’s system IP address.

„

— Specifies the access level of the user:

„

—An SNMP management application using the string 

can get (read) object values on the switch but cannot set (write) 
them. 

„

—An SNMP management application using the string 

can get object values on the switch but cannot set them. The 
switch can use the string to send notifications.