3com WX2200 3CRWX220095A User Manual

C

HAPTER

 8: AAA C

OMMANDS

user last-resort-guestssid

Vlan-Name = k2

user last-resort-any

Vlan-Name = foo

mac-user 01:02:03:04:05:06

usergroup eastcoasters

   session-timeout = 99

Table 42 describes the fields that can appear in display aaa output. 

Table 42   display aaa Output

Default Values

RADIUS default values for all parameters.

authport

UDP port on the WX for transmission of RADIUS 
authorization and authentication messages. The default 
port is 1812.

acctport

UDP port on the WX for transmission of RADIUS 
accounting records. The default is port 1813.

timeout

Number of seconds the WX switch waits for a RADIUS 
server to respond before retransmitting. The default is 
5 seconds.

acct-timeout

Number of seconds the WX waits for a RADIUS server to 
respond to an accounting request before retransmitting. 
The default is 5 seconds. 

retrans

Number of times the WX switch retransmits a message 
before determining a RADIUS server unresponsive. The 
default is 3 times.

deadtime

Number of minutes the WX switch waits after determining 
a RADIUS server is unresponsive before trying to reconnect 
with this server. During the dead time, the RADIUS server 
is ignored by the WX. The default is 0 minutes.

key

Shared secret key, or password, used to authenticate to a 
RADIUS server. The default is no key.

author-pass

Password used for authorization to a RADIUS server for 
MAC authentication. The client MAC address is sent as the 
username and the author-pass string is sent as the 
password.

Radius Servers

Information about active RADIUS servers.

Server

Name of each RADIUS server currently active.

Addr

IP address of each RADIUS server currently active.

Ports

UDP ports that the WX switch uses for authentication 
messages and for accounting records.