3com WX2200 3CRWX220095A User Manual

Usage — This command has no effect if the WX member is not 
configured as part of a Mobility Domain or the current WX is not the 
seed.

Examples — The following command clears a Mobility Domain member 
with the IP address 192.168.0.1:

WX1200# clear mobility-domain member 192.168.0.1

„

On the seed WX, displays the Mobility Domain status and members. 

Syntax — 

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 1.0.

Examples — To display Mobility Domain status, type the following 
command:

WX# display mobility-domain

Mobility Domain name: Pleasanton (security required)

Member

State

Type(*:active)

Model

Version

-----------

----------

------

-------

-------

10.8.107.1 STATE_UP 

SEED* 

WX-20 

6.0.1.0

10.10.10.66 STATE_DOWN 

MEMBER 

Unknown 

Unknown

Table 46   display mobility-domain Output

Mobility Domain name

Name of the Mobility Domain

Member

IP addresses of the seed WX and members in the Mobility 
Domain

State

State of the WX in the Mobility Domain:

„

STATE_UP

„

STATE_DOWN