3com WX2200 3CRWX220095A User Manual

Page of 750
set service-profile auth-psk
435
Access — Enabled.
History —Introduced in MSS Version 3.0. Option for WebAAA fallthru 
authentication type changed from web-auth to web-portal in MSS 
Version 4.1.
Usage — The last-resort fallthru authentication type allows any user to 
access any SSID managed by the service profile. This method does not 
require the user to provide a username or password. Use the last-resort 
method only if none of the SSIDs managed by the service profile require 
secure access. 
The web-auth authentication type requires additional configuration 
items. (See the “Configuring AAA for Network Users” chapter of the 
Examples — The following command sets the fallthru authentication for 
SSIDS managed by the service profile rnd_lab to none:
WX4400# set service-profile rnd_lab auth-fallthru none
success: change accepted.
See Also
„
„
„
set service-profile 
auth-psk
Enables pre-shared key (PSK) authentication of Wi-Fi Protected Access 
(WPA) clients by MAP radios in a radio profile, when the WPA information 
element (IE) is enabled in the service profile. 
Syntax — 
set service-profile
 
name
 
auth-psk
 
{enable
 
|
 
disable}
„
name
 — Service profile name.
„
enable
  Enables PSK authentication of WPA clients.
„
disable
  Disables PSK authentication of WPA clients.
Defaults — When the WPA IE is enabled, PSK authentication of WPA 
clients is enabled by default. If the WPA IE is disabled, the auth-psk 
setting has no effect.