3com WX2200 3CRWX220095A User Manual

WX4400# set service-profile sp1 cos 7

success: change accepted.

„

„

Enables or disables DHCP Restrict on a service profile. DHCP Restrict filters 
the traffic from a newly associated client and allows DHCP traffic only, 
until the client has been authenticated and authorized. All other traffic is 
captured by the WX and is not forwarded. After the client is successfully 
authorized, the traffic restriction is removed. 

 — set service-profile name dhcp-restrict {enable | 

disable}

„

 — Service profile name.

„

 — Enables DHCP Restrict.

„

 — Disables DHCP Restrict.

Examples — DHCP Restrict is disabled by default.

Access — Enabled.

History —Introduced in MSS Version 4.2.

Usage — To further reduce the overhead of DHCP traffic, use the set 
service-profile no-broadcast command to disable DHCP broadcast 
traffic from MAP radios to clients on the service profile’s SSID.

Examples — The following command enables DHCP Restrict on service 
profile sp1:

WX4400# set service-profile sp1 dhcp-restrict enable

success: change accepted.

„

„

„