3com WX2200 3CRWX220095A User Manual
488
C
HAPTER
12: STP C
OMMANDS
display spantree
Displays STP configuration and port-state information.
Syntax —
display spantree [port-list | vlan vlan-id][active]
port-list
— List of ports. If you do not specify any ports, MSS
displays STP information for all ports.
vlan
vlan-id
— VLAN name or number. If you do not specify a VLAN,
MSS displays STP information for all VLANs.
active
— Displays information for only the active (forwarding) ports.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0. Version 4.2 added a value STP
Off for STP-State and Port-State fields. This state indicates that STP is
disabled on the port. The Disabled state is still used, but only to indicate
that the port is not forwarding traffic.
Off for STP-State and Port-State fields. This state indicates that STP is
disabled on the port. The Disabled state is still used, but only to indicate
that the port is not forwarding traffic.
Examples — The following command displays STP information for VLAN
default:
default:
WX1200# display spantree vlan default
VLAN 1
Spanning tree mode PVST+
Spanning tree type IEEE
Spanning tree enabled
Designated Root 00-02-4a-70-49-f7
Designated Root Priority 32768
Designated Root Path Cost
19
Designated Root Port 1
Root Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
Bridge ID MAC ADDR 00-0b-0e-02-76-f7
Bridge ID Priority 32768
Bridge Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec
Port Vlan STP-State Cost Prio Portfast
------------------------------------------------------------------------------
1
1 Forwarding 19 128 Disabled
2
1
STP Off
19
128 Disabled
3
1 Disabled 19 128 Disabled
4
1 Disabled 19 128 Disabled
5
1 Disabled 19 128 Disabled
6
1 Disabled 19 128 Disabled