3com WX2200 3CRWX220095A User Manual
load config
679
Table 115 describes the fields in the display version output.
See Also
load config
Loads configuration commands from a file and replaces the WX switch’s
running configuration with the commands in the loaded file.
running configuration with the commands in the loaded file.
CAUTION: This command completely removes the running configuration
and replaces it with the configuration contained in the file. 3Com
recommends that you save a copy of the current running configuration to
a backup configuration file before loading a new configuration.
and replaces it with the configuration contained in the file. 3Com
recommends that you save a copy of the current running configuration to
a backup configuration file before loading a new configuration.
Syntax —
load config [url]
url
— Filename. Specify between 1 and 128 alphanumeric characters,
with no spaces.
If the file is in a subdirectory, specify the subdirectory name, followed
by a forward slash, in front of the filename. For example:
backup_configs/config_c.
by a forward slash, in front of the filename. For example:
backup_configs/config_c.
Table 115 Output for display version
Field
Description
Build Information Factory timestamp of the image file.
Label
Software version and build date.
Build Suffix
Build suffix.
Model
Build model.
Hardware
Version information for the WX switch’s motherboard and
Power over Ethernet (PoE) board.
Power over Ethernet (PoE) board.
Serial number
Serial number of the WX switch.
Flash
Flash memory version.
Kernel
Kernel version.
BootLoader
Boot code version.
Port/AP
Port number connected to a MAP access point.
AP Model
MAP model number.
Serial #
MAP serial number.
Versions
MAP hardware, firmware, and software versions.