3com WX2200 3CRWX220095A User Manual

Displays system information stored in the nonvolatile log buffer or the 
trace buffer. 

Syntax —

 display log trace [{+|-|/}number-of-messages] 

[facility facility-name] [matching string] 

[severity severity-level]

„

 — Displays the log messages in the trace buffer.

„

+|-|/number-of-messages 

— Displays the number of messages 

specified as follows:

„

A positive number (for example, +100), displays that number of log 
entries starting from the oldest in the log.

„

A negative number (for example, -100) displays that number of log 
entries starting from newest in the log. 

„

A number preceded by a slash (for example, /100) displays that 
number of the most recent log entries in the log, starting with the 
least recent.

„

 

 — Area of MSS that is sending the log 

message. Type a space and a question mark (?) after display log 
trace facility for a list of valid facilities.

„

 — Displays messages that match a string—for 

example, a username or IP address.

„

 — Displays messages at a severity level 

greater than or equal to the level specified. Specify one of the 
following: 

„

 — The WX switch is unusable.

„

 — Action must be taken immediately.

„

 — You must resolve the critical conditions. If the 

conditions are not resolved, the WX can reboot or shut down.

„

 — The WX is missing data or is unable to form a connection.

„

 — A possible problem exists.

„

 — Events that potentially can cause system problems have 

occurred. These are logged for diagnostic purposes. No action is 
required.

„

 — Informational messages only. No problem exists.

„

 — Output from debugging.