3com WX2200 3CRWX220095A User Manual

Examples — The following command clears port 5:

WX1200# clear port type 5

This may disrupt currently authenticated users. 

Are you sure? (y/n) [n]y

success: change accepted.

„

„

Displays port statistics.

Syntax — 

display port counters 

[octets | packets | receive-errors | transmit-errors | 

collisions | receive-etherstats  |

transmit-etherstats] [port port-list]

„

 — Shows octet statistics.

„

 — Shows packet statistics. 

„

— Shows errors in received packets.

„

— Shows errors in transmitted packets.

„

 — Shows collision statistics. 

Table 10   Network port defaults

VLAN membership

None.

Note: Although the command changes a port to a 
network port, the command does not place the port 
in any VLAN. To use the port in a VLAN, you must 
add the port to the VLAN.

Spanning Tree Protocol (STP) Based on the VLAN(s) you add the port to.

802.1X

No authorization.

Port groups

None.

Internet Group Management 
Protocol (IGMP) snooping

Enabled as port is added to VLANs.

Access point and radio 
parameters

Not applicable

Maximum user sessions

Not applicable