3com WX2200 3CRWX220095A User Manual
set port name
93
set port name
Assigns a name to a port. After naming a port, you can use the port
name or number in other CLI commands.
name or number in other CLI commands.
Syntax —
set port port name
name
port
— Number of a physical port. You can specify only one port.
name
name
— Alphanumeric string of up to 16 characters, with no
spaces.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To simplify configuration and avoid confusion between a port’s
number and its name, 3Com recommends that you do not use numbers
as port names.
number and its name, 3Com recommends that you do not use numbers
as port names.
Examples — The following command sets the name of port 7 to
adminpool
:
WX1200# set port 7 name adminpool
success: change accepted.
See Also
set port negotiation
Disables or reenables autonegotiation on gigabit Ethernet or 10/100
Ethernet ports.
Ethernet ports.
Syntax —
set port negotiation port-list {enable | disable}
port-list
— List of physical ports. MSS disables or reenables
autonegotiation on all the specified ports.
enable
— Enables autonegotiation on the specified ports.
disable
— Disables autonegotiation on the specified ports.
Defaults — Autonegotiation is enabled on all Ethernet ports by default.