Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. 4-152-678-11
  5. User Manual

Sony 4-152-678-11 User Manual

Download
Page of 123
Before requesting service
Bluetooth
®
The Bluetooth
®
 device cannot be registered, or paired, with 
the PSP
®
 system.
  There may be too much distance between the system and 
the Bluetooth
®
 device.
  The Bluetooth
®
 device may not be compatible with the 
profiles that are supported by the system.
  The maximum number of Bluetooth
®
 devices that can be 
paired is eight. Try deleting a registered device to pair a 
new device.
A connection cannot be established between the Bluetooth
®
 
device and the PSP
®
 system.
  Check that the Bluetooth
®
 device is paired with the system. 
If it is not paired, go to   (Bluetooth
®
 Device Settings)   
[Manage Bluetooth
®
 Devices]   [Register New Device] to 
pair the device.
  Check that the Bluetooth
®
 device is turned on.
  If the Bluetooth
®
 device has been reset, you must pair it 
with the system again.
There is no sound from the Bluetooth
®
 device.
  Check that the Bluetooth
®
 device is not set in mute mode.
  Try adjusting the volume on either the Bluetooth
®
 device or 
the PSP
®
 system.
There is noise. The sound is not continuous.
  If there are obstacles such as walls between the PSP
®
 
system and the Bluetooth
®
 device, change the location of 
the devices and then connect the Bluetooth
®
 device again.
  If a device that causes radio interference such as a 
microwave oven or an induction cook top or appliance is 
nearby, communication with the system may not work 
properly.
There is a delay in the audio.
  Due to the characteristics of Bluetooth
®
 technology, there 
may be a delay in the audio. If you feel the lag in the audio 
is a problem, use wired headphones instead.
Other issues
The system or AC adaptor is warm.
  During use, the system or AC adaptor may become warm. 
This is not a malfunction.
  When the communication function is being used, the 
system may become warmer than during normal use. This 
is not a malfunction.
The system is turned on, but does not operate.
  Check that the system is not in hold mode. If it is, slide the 
POWER/HOLD switch up to clear hold mode.