Panasonic TY-FB12LC User Manual
3
English
Installation
Precautions
● Before removing, turn the main power of the unit off.
● When installing or removing the terminal board, exercise care to avoid injury.
There may be some sharp-pointed solder joints on the rear side of the board that could cause
unexpected injury.
● When installing the board, fully insert the Board into the slot horizontally until it is firmly plugged
into the connector.
Note that incomplete insertion may damage the internal components.
■
Compatible slot: SLOT1, SLOT2, SLOT3
■
Installation Procedure
1
Turn off the display and the connected equipment, and disconnect the power supply plugs from the
wall sockets.
Disconnect all cables connected to the unit.
Disconnect all cables connected to the unit.
2
Followtheprocedurebelowandinstalltheterminalboardinthedisplay.
To install
1. Remove the slot cover.
Securing screw
2. Insert the terminal board until it is
firmly plugged into the connector.
Tighten screws in the order
Tighten screws in the order
1
-
4
.
3.Affixtheterminalfunction
label(included).
3
4
2
1
•MakesurethattheBoarddoesnotrideonthetwolowerclaws.
•Besuretofastenallscrewstightly.
•HavethecustomerkeeptheremovedTerminalBoardforfutureservicingneeds.
•Besuretofastenallscrewstightly.
•HavethecustomerkeeptheremovedTerminalBoardforfutureservicingneeds.
Foammatorthicksoftcloth
To remove
Removethescrews.Gripthehandleofthe
terminal board, and slowly pull out in the
direction of the arrow.
terminal board, and slowly pull out in the
direction of the arrow.